Routing Data Packet Using Tracert

When we send messages or retrieve data on the specific address, we need to know the data message is sent or received via any route. This need to know how long the data is our message to the objective of hops and any data transmitted. By using the tracert Instructions, hops into the package can be seen and known time that data.

This below example result routing from my computer:

traceroute to yahoo.com (68.180.206.184), 30 hops max,
40 byte packets
1  vlan250.lon-service6.Melbourne.telstra.net (203.50.2.177)
0.264 ms  0.267 ms  0.294 ms
2  TenGigabitEthernet0-12-0-2.exi-core1.Melbourne.telstra.net
(203.50.80.1)  0.604 ms  0.436 ms  0.411 ms
3  Bundle-POS1.chw-core2.Sydney.telstra.net (203.50.6.13)
14.732 ms  14.772 ms  14.777 ms
4  Bundle-Ether1.oxf-gw2.Sydney.telstra.net (203.50.6.90)
14.897 ms  14.926 ms  14.931 ms
5  TenGigabitEthernetx-0.syd-core04.Sydney.reach.com
(203.50.13.18)  15.287 ms  15.238 ms  15.362 ms
6  static.net.reach.com (202.84.140.229)  162.323 ms
162.181 ms  162.201 ms
7  static.net.reach.com (202.84.251.74)  162.324 ms
162.535 ms  162.361 ms
8  yahoo.paix05.net.reach.com (134.159.63.22)  195.028 ms
194.956 ms  194.941 ms
9  ae0-p141.msr1.sp1.yahoo.com (216.115.107.51)  195.051 ms
ae1-p151.msr2.sp1.yahoo.com (216.115.107.79)  195.011 ms
ae0-p141.msr1.sp1.yahoo.com (216.115.107.51)  195.075 ms
10  te-9-1.bas-a1.sp1.yahoo.com (209.131.32.21)  195.217
ms te-8-1.bas-a1.sp1.yahoo.com (209.131.32.17)  195.377
ms te-9-1.bas-a1.sp1.yahoo.com (209.131.32.21)  195.211 ms
11  * * *

You can using instructions: C> tracert domain ->
example tracert my blog C>tracert adrianindo.blogspot.com
or using here